| |
ADS Circuit Simulation Techniques培訓
|
| |
 班級規模及環境--熱線:4008699035 手機:15921673576( 微信同號) |
| 每個班級的人數限3到5人，互動授課， 保障效果，小班授課。 |
| 上間和地點 |
上部份地點：【上?！客瑵?jì)大學(滬西)/新城金郡商務樓(11號線白銀路站)【深圳分部】：電影大廈(地鐵一號線大劇院站)/深圳大學成教院【北京分部】：北京中山學院/福鑫大樓【南京分部】：金港大廈(和燕路)【武漢分部】：佳源大廈（高新二路）【成都分部】：領館區1號（中和大道）【沈陽分部】：沈陽理工大學/六宅臻品【鄭州分部】：鄭州大學/錦華大廈【石家莊分部】：河北科技大學/瑞景大廈
最近開間(周末班/連續班/晚班）：2019年1月26日 |
| 實驗設備 |
◆小班教學，教學效果好
☆注重質量☆邊講邊練
☆合格學員免費推薦工作
★實驗設備請點擊這兒查看★ |
| 質量保障 |
1、培訓過程中，如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
2、培訓結束后,授課老師留給學員聯系方式,保障培訓效果,免費提供課后技術支持。
3、培訓合格學員可享受免費推薦就業機會?！詈细駥W(xué)員免費頒發相關工程師等資格證書，提升職業資質。專注高端技術培訓15年，端海學員的能力得到大家的認同，受到用人單位的廣泛贊譽，端海的證書受到廣泛認可。 |
部份程大綱 |
| |
-
-
-
Part 1：FET Amplifier and Load Pull DesignGuide
The first part covers using a basic Load Pull DesignGuide setup for a FET from the built-in ADS DemoKit. Also included are the use of variables, a stability network, the Smith Chart contours, and more. The skills you will learn in this part can be applied to other simulations.
A Lab is included in this part. This Lab topics are Load Pull design guide and stability for a FET amplifier design, including:
New Workspace with Load Pull Design Guide
Set up the DemoKit FET for Load Pull
Specify the Basic Variables and Simulate
Stability Network and Rectangular Load Sweep
Circular Sweep for Load Pull
Other Load Pull Results
Load Pull Summary
Part 2：Matching Designing and Optimization
This second part covers Optimization and Goals, including an overview of the ADS optimizer. It also covers how to use the Impedance Matching tool and more.
A Lab is included in this part. This Lab topics are Small-signal S-parameter optimization and designing matching networks for amplifiers and other designs. Optional is the Impedance Matching too. More details are:
Amplifier Design with Template
Simulate and examine Gain and Stability
Set up an Optimization controller and Goals
Enabling Variables or Parameters to be Optimized
Running an Optimization
Simulate with a Matching Network
OPTIONAL: Impedance Matching tool
Part 3：Harmonic Balance Techniques
This third part covers Harmonic Balance simulations, including swept variables, IP3 and 2-tone analysis.
There also is a Lab in this part, demonstrating Harmonic Balance simulations including swept variables, 2-tone simulations, equations for HB data, compression, and IP3. More details about the Lab are:
FET amplifier design
Basic HB 1-tone Simulation
Functions and Equations for Input Power and Zin
Gain Compression using XDB
Sweep Input Power and Bias Voltage
Output Power, Gain, and Power Sweep with a Slider
Two-tone HB Simulation with variables
Spectrum and Mix table
OPTIONAL: IP3 Simulation (Third Order Intercept Point)
Part 4：Circuit Envelope Simulations with Modulated Sources
The last part covers Circuit Envelope simulation, which uses modulated sources such as CDMA and GSM. The envelope data is also covered.
A Lab is included in this part, which demonstrating Circuit Envelope simulation using system components and a FET amplifier with GSM and CDMA modulated sources. More details about the Lab are:
Create a new Workspace
System Amp and PtRF source design
Envelope simulation controller setup
Simulate and plot the time domain response.
Simulate with Amp distortion
Amp with Demodulators for GSM
GSM Envelope Simulation with VAR setup
Copy FET AMP into the current workspace
CDMA setup for FET Amp
Example Data Display: ModSources_wrk
CDMA simulation and data equation
OPTIONAL – Distortion Effects using the Tune
|
|
|
|
|
|
首頁 課程表 在線聊 報名 講師 品牌 QQ聊 活動 就業